Info: 'This drive will turn on TCAL again automatically after 20 minutes.'
DITL_6000.txt
Items: (4 entries)
0:
Bounds: x1=270, y1=130, x2=380, y2=150
Type: 4
Info: 'Cancel'
1:
Bounds: x1=11, y1=5, x2=399, y2=87
Type: -120
Info: 'This option was written so that Mac users wishing to disable periodic thermal calibration on some disk drives could do so without special equipment. This option will either disable the TCAL or enable the TCAL. '
2:
Bounds: x1=30, y1=130, x2=130, y2=150
Type: 4
Info: 'Disable TCAL'
3:
Bounds: x1=150, y1=130, x2=250, y2=150
Type: 4
Info: 'Enable TCAL'
DITL_5900.txt
Items: (5 entries)
0:
Bounds: x1=70, y1=110, x2=128, y2=130
Type: 4
Info: 'OK'
1:
Bounds: x1=6, y1=15, x2=96, y2=31
Type: -120
Info: 'ROM Version:'
2:
Bounds: x1=7, y1=41, x2=88, y2=56
Type: -120
Info: 'NuBus Slot:'
3:
Bounds: x1=95, y1=16, x2=156, y2=32
Type: 8
Info: ''
4:
Bounds: x1=95, y1=41, x2=179, y2=57
Type: 8
Info: ''
DITL_3050.txt
Items: (3 entries)
0:
Bounds: x1=58, y1=79, x2=118, y2=99
Type: 4
Info: 'OK'
1:
Bounds: x1=2, y1=21, x2=34, y2=53
Type: -96
Info: ' '
2:
Bounds: x1=42, y1=20, x2=160, y2=60
Type: -120
Info: 'Your drive need to be formatted. '
DITL_3040.txt
Items: (3 entries)
0:
Bounds: x1=59, y1=89, x2=119, y2=109
Type: 4
Info: 'OK'
1:
Bounds: x1=3, y1=7, x2=35, y2=39
Type: -96
Info: ' '
2:
Bounds: x1=36, y1=6, x2=167, y2=85
Type: -120
Info: 'Unmount failed! error : ^0^1^2^3'
DITL_3030.txt
Items: (3 entries)
0:
Bounds: x1=59, y1=89, x2=119, y2=109
Type: 4
Info: 'OK'
1:
Bounds: x1=2, y1=21, x2=34, y2=53
Type: -96
Info: ' '
2:
Bounds: x1=42, y1=15, x2=159, y2=76
Type: -120
Info: 'Unmount failed! One or more files are opened.'
DITL_3020.txt
Items: (5 entries)
0:
Bounds: x1=100, y1=107, x2=160, y2=127
Type: 4
Info: 'OK'
1:
Bounds: x1=2, y1=5, x2=34, y2=37
Type: -96
Info: ' '
2:
Bounds: x1=35, y1=-2, x2=171, y2=44
Type: -120
Info: 'You have selected a backup drive of a mirrored set. You '
3:
Bounds: x1=0, y1=44, x2=174, y2=92
Type: -120
Info: 'must use the QuickSCSI Manager to turn mirroring off before you'
4:
Bounds: x1=1, y1=92, x2=87, y2=109
Type: -120
Info: 'can erase it.'
DITL_3010.txt
Items: (5 entries)
0:
Bounds: x1=103, y1=109, x2=163, y2=129
Type: 4
Info: 'OK'
1:
Bounds: x1=2, y1=5, x2=34, y2=37
Type: -96
Info: ' '
2:
Bounds: x1=35, y1=2, x2=169, y2=49
Type: -120
Info: 'You have selected a primary drive of a mirrored set. You '
3:
Bounds: x1=2, y1=48, x2=173, y2=95
Type: -120
Info: 'must use the QuickSCSI Manager to turn mirroring off before you '
4:
Bounds: x1=1, y1=95, x2=87, y2=112
Type: -120
Info: 'can erase it.'
DITL_3000.txt
Items: (3 entries)
0:
Bounds: x1=73, y1=90, x2=129, y2=109
Type: 4
Info: 'OK'
1:
Bounds: x1=6, y1=12, x2=38, y2=44
Type: -96
Info: ' '
2:
Bounds: x1=52, y1=12, x2=171, y2=78
Type: -120
Info: 'The system does not recognize a QuickSCSI Card in the NuBus slot.'
DITL_2200.txt
Items: (4 entries)
0:
Bounds: x1=92, y1=107, x2=152, y2=127
Type: 4
Info: 'OK'
1:
Bounds: x1=2, y1=3, x2=34, y2=35
Type: -96
Info: ' '
2:
Bounds: x1=3, y1=35, x2=172, y2=96
Type: 8
Info: 'with the Infinity Flopical drive only if you have the 20meg flopical diskette insertted. '
3:
Bounds: x1=39, y1=2, x2=170, y2=35
Type: 8
Info: 'You can run this software to work with the Infinity Flopical drive only '
DITL_2110.txt
Items: (3 entries)
0:
Bounds: x1=103, y1=114, x2=158, y2=134
Type: 4
Info: 'OK'
1:
Bounds: x1=25, y1=114, x2=80, y2=134
Type: 4
Info: 'CANCEL'
2:
Bounds: x1=7, y1=4, x2=175, y2=100
Type: 8
Info: 'Carefully remove the cartridge and insert another one. When the drive is ready, click the OK button.'
DITL_2105.txt
Items: (3 entries)
0:
Bounds: x1=103, y1=108, x2=158, y2=128
Type: 4
Info: 'No'
1:
Bounds: x1=27, y1=108, x2=82, y2=128
Type: 4
Info: 'YES'
2:
Bounds: x1=8, y1=1, x2=179, y2=92
Type: 8
Info: 'Format was successful. Do you wish to format another cartridge?'
Info: 'It is strongly suggested that you make a backup of your drive before running this option. Remapping bad blocks that contain data may cause loss of data.'
DITL_1850.txt
Items: (4 entries)
0:
Bounds: x1=95, y1=95, x2=165, y2=115
Type: 4
Info: 'Cancel'
1:
Bounds: x1=58, y1=175, x2=95, y2=188
Type: -128
Info: ''
2:
Bounds: x1=15, y1=95, x2=85, y2=115
Type: 4
Info: 'Continue'
3:
Bounds: x1=4, y1=13, x2=176, y2=69
Type: 8
Info: 'Can not create log file. The disk containing the formatter may be locked.'
DITL_1800.txt
Items: (3 entries)
0:
Bounds: x1=13, y1=63, x2=164, y2=83
Type: 4
Info: 'Access drive directly'
1:
Bounds: x1=13, y1=95, x2=164, y2=115
Type: 4
Info: 'Access through driver'
2:
Bounds: x1=13, y1=6, x2=164, y2=42
Type: 8
Info: 'Please choose type of access.'
DITL_1700.txt
Items: (6 entries)
0:
Bounds: x1=96, y1=113, x2=156, y2=131
Type: 4
Info: 'Cancel'
1:
Bounds: x1=12, y1=113, x2=72, y2=131
Type: 4
Info: 'Proceed'
2:
Bounds: x1=0, y1=-2, x2=172, y2=29
Type: -120
Info: 'After the process is stopped, the drive '
3:
Bounds: x1=0, y1=28, x2=169, y2=42
Type: -120
Info: 'will be reformatted. '
4:
Bounds: x1=0, y1=42, x2=174, y2=87
Type: -120
Info: 'This could take a long time depending on your drive's size. '
5:
Bounds: x1=1, y1=89, x2=126, y2=104
Type: -120
Info: 'Proceed anyway?'
DITL_1600.txt
Items: (2 entries)
0:
Bounds: x1=78, y1=112, x2=159, y2=134
Type: 4
Info: 'OK'
1:
Bounds: x1=5, y1=5, x2=180, y2=100
Type: -120
Info: 'The driver has been updated, but will not be active until you restart your system. Please shut down now in order to activate the new driver.'
DITL_1500.txt
Items: (4 entries)
0:
Bounds: x1=73, y1=108, x2=133, y2=128
Type: 4
Info: 'OK'
1:
Bounds: x1=2, y1=3, x2=34, y2=35
Type: -96
Info: ' '
2:
Bounds: x1=36, y1=2, x2=169, y2=34
Type: 8
Info: 'The selected drive cannot be updated to this driver level without reformatting. To update the drive, back it up and then reformat. '
3:
Bounds: x1=1, y1=35, x2=169, y2=99
Type: 8
Info: 'to this driver level without reformatting. To update the drive, back it up and then reformat. '
DITL_1400.txt
Items: (8 entries)
0:
Bounds: x1=158, y1=128, x2=182, y2=143
Type: 4
Info: 'OK'
1:
Bounds: x1=156, y1=111, x2=181, y2=123
Type: -128
Info: ''
2:
Bounds: x1=2, y1=16, x2=191, y2=97
Type: 8
Info: 'Size in KBytes: ^0Vendor: ^1Product: ^2Version: ^3'
3:
Bounds: x1=0, y1=113, x2=130, y2=146
Type: 8
Info: ''
4:
Bounds: x1=2, y1=1, x2=64, y2=17
Type: 8
Info: 'SCSI ID:'
5:
Bounds: x1=63, y1=1, x2=123, y2=16
Type: 8
Info: ''
6:
Bounds: x1=1, y1=96, x2=61, y2=112
Type: 8
Info: 'Driver:'
7:
Bounds: x1=131, y1=128, x2=152, y2=143
Type: 8
Info: ''
DITL_1300.txt
Items: (10 entries)
0:
Bounds: x1=7, y1=2, x2=171, y2=52
Type: 8
Info: 'Read/Write Verify in process. Press . to stop.^0^1^2^3'
1:
Bounds: x1=7, y1=53, x2=83, y2=73
Type: 8
Info: 'Operation:'
2:
Bounds: x1=7, y1=72, x2=83, y2=92
Type: 8
Info: 'Block #:'
3:
Bounds: x1=82, y1=72, x2=173, y2=92
Type: 8
Info: ''
4:
Bounds: x1=82, y1=53, x2=173, y2=73
Type: 8
Info: ''
5:
Bounds: x1=7, y1=91, x2=132, y2=107
Type: 8
Info: 'Number of errors:'
6:
Bounds: x1=131, y1=91, x2=173, y2=107
Type: 8
Info: ''
7:
Bounds: x1=7, y1=106, x2=173, y2=121
Type: 8
Info: 'Last error occured on'
8:
Bounds: x1=7, y1=120, x2=67, y2=140
Type: 8
Info: 'Block#:'
9:
Bounds: x1=66, y1=120, x2=173, y2=140
Type: 8
Info: ''
DITL_1200.txt
Items: (1 entries)
0:
Bounds: x1=8, y1=8, x2=170, y2=136
Type: -120
Info: '^0Initializing "^1" volume.^2^3'
DITL_1105.txt
Items: (19 entries)
0:
Bounds: x1=6, y1=5, x2=174, y2=22
Type: -120
Info: 'Partition Map…'
1:
Bounds: x1=8, y1=47, x2=20, y2=64
Type: 8
Info: ''
2:
Bounds: x1=22, y1=47, x2=127, y2=64
Type: 8
Info: ''
3:
Bounds: x1=129, y1=47, x2=168, y2=64
Type: 8
Info: ''
4:
Bounds: x1=8, y1=66, x2=20, y2=83
Type: 8
Info: ''
5:
Bounds: x1=22, y1=66, x2=127, y2=83
Type: 8
Info: ''
6:
Bounds: x1=129, y1=66, x2=168, y2=83
Type: 8
Info: ''
7:
Bounds: x1=8, y1=85, x2=20, y2=102
Type: 8
Info: ''
8:
Bounds: x1=22, y1=85, x2=127, y2=102
Type: 8
Info: ''
9:
Bounds: x1=129, y1=85, x2=168, y2=102
Type: 8
Info: ''
10:
Bounds: x1=8, y1=104, x2=20, y2=121
Type: 8
Info: ''
11:
Bounds: x1=22, y1=104, x2=127, y2=121
Type: 8
Info: ''
12:
Bounds: x1=129, y1=104, x2=168, y2=121
Type: 8
Info: ''
13:
Bounds: x1=8, y1=123, x2=20, y2=140
Type: 8
Info: ''
14:
Bounds: x1=22, y1=123, x2=127, y2=140
Type: 8
Info: ''
15:
Bounds: x1=129, y1=123, x2=168, y2=140
Type: 8
Info: ''
16:
Bounds: x1=8, y1=28, x2=20, y2=45
Type: -120
Info: '#'
17:
Bounds: x1=22, y1=28, x2=127, y2=45
Type: -120
Info: 'Volume Name'
18:
Bounds: x1=129, y1=28, x2=168, y2=45
Type: 8
Info: 'VolType'
DITL_1100.txt
Items: (22 entries)
0:
Bounds: x1=1, y1=0, x2=181, y2=17
Type: -120
Info: 'Wait for the initializing… '
1:
Bounds: x1=7, y1=18, x2=19, y2=35
Type: -120
Info: '#'
2:
Bounds: x1=21, y1=18, x2=127, y2=35
Type: -120
Info: 'Volume Name'
3:
Bounds: x1=128, y1=18, x2=167, y2=35
Type: 8
Info: 'KBytes'
4:
Bounds: x1=7, y1=37, x2=19, y2=54
Type: 8
Info: ''
5:
Bounds: x1=21, y1=37, x2=126, y2=52
Type: 8
Info: ''
6:
Bounds: x1=128, y1=37, x2=178, y2=54
Type: 8
Info: ''
7:
Bounds: x1=7, y1=55, x2=19, y2=72
Type: 8
Info: ''
8:
Bounds: x1=21, y1=55, x2=126, y2=70
Type: 8
Info: ''
9:
Bounds: x1=128, y1=55, x2=178, y2=72
Type: 8
Info: ''
10:
Bounds: x1=7, y1=73, x2=19, y2=90
Type: 8
Info: ''
11:
Bounds: x1=21, y1=73, x2=126, y2=88
Type: 8
Info: ''
12:
Bounds: x1=128, y1=73, x2=178, y2=90
Type: 8
Info: ''
13:
Bounds: x1=7, y1=91, x2=19, y2=108
Type: 8
Info: ''
14:
Bounds: x1=21, y1=91, x2=126, y2=106
Type: 8
Info: ''
15:
Bounds: x1=128, y1=91, x2=178, y2=108
Type: 8
Info: ''
16:
Bounds: x1=7, y1=109, x2=19, y2=126
Type: 8
Info: ''
17:
Bounds: x1=21, y1=109, x2=126, y2=124
Type: 8
Info: ''
18:
Bounds: x1=128, y1=109, x2=178, y2=126
Type: 8
Info: ''
19:
Bounds: x1=7, y1=127, x2=19, y2=144
Type: -120
Info: ''
20:
Bounds: x1=20, y1=127, x2=126, y2=144
Type: -120
Info: ''
21:
Bounds: x1=128, y1=127, x2=178, y2=144
Type: 8
Info: ''
DITL_1010.txt
Items: (4 entries)
0:
Bounds: x1=118, y1=68, x2=178, y2=88
Type: 4
Info: 'Yes'
1:
Bounds: x1=37, y1=68, x2=97, y2=88
Type: 4
Info: 'No'
2:
Bounds: x1=41, y1=0, x2=230, y2=53
Type: -120
Info: 'A portion of your drive is unused. Would you like to create another partition?'
3:
Bounds: x1=3, y1=5, x2=35, y2=37
Type: -96
Info: ' '
DITL_1005.txt
Items: (55 entries)
0:
Bounds: x1=132, y1=244, x2=254, y2=269
Type: 4
Info: 'Redo'
1:
Bounds: x1=9, y1=127, x2=104, y2=146
Type: 6
Info: 'Mac OS'
2:
Bounds: x1=9, y1=168, x2=113, y2=184
Type: 6
Info: 'Root'
3:
Bounds: x1=9, y1=187, x2=122, y2=203
Type: 6
Info: 'Swap'
4:
Bounds: x1=9, y1=206, x2=122, y2=222
Type: 6
Info: 'Eschatology 1'
5:
Bounds: x1=9, y1=225, x2=119, y2=241
Type: 6
Info: 'Eschatology 2'
6:
Bounds: x1=9, y1=244, x2=116, y2=260
Type: 6
Info: 'Extra'
7:
Bounds: x1=9, y1=263, x2=119, y2=279
Type: 6
Info: 'Unreserved 1'
8:
Bounds: x1=56, y1=57, x2=235, y2=75
Type: 16
Info: 'Untiled'
9:
Bounds: x1=9, y1=82, x2=122, y2=98
Type: -120
Info: 'Available Size:'
10:
Bounds: x1=54, y1=104, x2=148, y2=121
Type: 16
Info: '1000'
11:
Bounds: x1=155, y1=104, x2=187, y2=123
Type: -120
Info: 'KB'
12:
Bounds: x1=9, y1=148, x2=105, y2=165
Type: -120
Info: 'A/UX options:'
13:
Bounds: x1=132, y1=154, x2=254, y2=179
Type: 4
Info: 'Next Partition'
14:
Bounds: x1=123, y1=134, x2=124, y2=289
Type: -124
Info: ''
15:
Bounds: x1=263, y1=5, x2=264, y2=288
Type: -124
Info: ''
16:
Bounds: x1=132, y1=199, x2=254, y2=224
Type: 4
Info: 'Done'
17:
Bounds: x1=272, y1=93, x2=381, y2=111
Type: -120
Info: 'Partition Map:'
18:
Bounds: x1=271, y1=115, x2=481, y2=288
Type: 8
Info: ''
19:
Bounds: x1=270, y1=114, x2=483, y2=115
Type: -124
Info: ''
20:
Bounds: x1=269, y1=114, x2=270, y2=289
Type: -124
Info: ''
21:
Bounds: x1=269, y1=289, x2=484, y2=290
Type: -124
Info: ''
22:
Bounds: x1=482, y1=114, x2=483, y2=289
Type: 4
Info: ''
23:
Bounds: x1=273, y1=118, x2=285, y2=135
Type: 8
Info: ''
24:
Bounds: x1=287, y1=118, x2=367, y2=135
Type: 8
Info: ''
25:
Bounds: x1=370, y1=118, x2=423, y2=135
Type: 8
Info: ''
26:
Bounds: x1=425, y1=118, x2=478, y2=135
Type: 8
Info: ''
27:
Bounds: x1=273, y1=139, x2=285, y2=156
Type: 8
Info: ''
28:
Bounds: x1=287, y1=139, x2=367, y2=156
Type: 8
Info: ''
29:
Bounds: x1=370, y1=139, x2=423, y2=156
Type: 8
Info: ''
30:
Bounds: x1=425, y1=139, x2=478, y2=156
Type: 8
Info: ''
31:
Bounds: x1=273, y1=160, x2=285, y2=177
Type: 8
Info: ''
32:
Bounds: x1=287, y1=160, x2=367, y2=177
Type: 8
Info: ''
33:
Bounds: x1=370, y1=160, x2=423, y2=177
Type: 8
Info: ''
34:
Bounds: x1=425, y1=160, x2=478, y2=177
Type: 8
Info: ''
35:
Bounds: x1=273, y1=181, x2=285, y2=198
Type: 8
Info: ''
36:
Bounds: x1=287, y1=181, x2=367, y2=198
Type: 8
Info: ''
37:
Bounds: x1=370, y1=181, x2=423, y2=198
Type: 8
Info: ''
38:
Bounds: x1=425, y1=181, x2=478, y2=198
Type: 8
Info: ''
39:
Bounds: x1=273, y1=202, x2=285, y2=219
Type: 8
Info: ''
40:
Bounds: x1=287, y1=202, x2=367, y2=219
Type: 8
Info: ''
41:
Bounds: x1=370, y1=202, x2=423, y2=219
Type: 8
Info: ''
42:
Bounds: x1=425, y1=202, x2=478, y2=219
Type: 8
Info: ''
43:
Bounds: x1=273, y1=223, x2=285, y2=240
Type: 8
Info: ''
44:
Bounds: x1=287, y1=223, x2=367, y2=240
Type: 8
Info: ''
45:
Bounds: x1=370, y1=223, x2=423, y2=240
Type: 8
Info: ''
46:
Bounds: x1=425, y1=223, x2=478, y2=240
Type: 8
Info: ''
47:
Bounds: x1=273, y1=244, x2=285, y2=261
Type: 8
Info: ''
48:
Bounds: x1=287, y1=244, x2=367, y2=261
Type: 8
Info: ''
49:
Bounds: x1=370, y1=244, x2=423, y2=261
Type: 8
Info: ''
50:
Bounds: x1=425, y1=244, x2=478, y2=261
Type: 8
Info: ''
51:
Bounds: x1=273, y1=267, x2=478, y2=286
Type: 8
Info: ''
52:
Bounds: x1=8, y1=41, x2=53, y2=56
Type: 8
Info: 'Name:'
53:
Bounds: x1=327, y1=8, x2=402, y2=83
Type: 0
Info: ''
54:
Bounds: x1=8, y1=2, x2=254, y2=38
Type: -120
Info: 'Total Disk Capacity is ^0 KB. Please name your volume'
DITL_1000.txt
Items: (11 entries)
0:
Bounds: x1=7, y1=120, x2=73, y2=140
Type: 4
Info: 'DONE'
1:
Bounds: x1=98, y1=120, x2=164, y2=140
Type: 4
Info: 'NEXT'
2:
Bounds: x1=3, y1=1, x2=174, y2=47
Type: -120
Info: 'Available Disk Space is ^0 KB. Please name your volume'
3:
Bounds: x1=256, y1=93, x2=303, y2=111
Type: -120
Info: ''
4:
Bounds: x1=9, y1=51, x2=171, y2=68
Type: 16
Info: 'Untitled'
5:
Bounds: x1=7, y1=76, x2=48, y2=94
Type: -120
Info: 'Size:'
6:
Bounds: x1=50, y1=77, x2=109, y2=91
Type: 16
Info: '1000'
7:
Bounds: x1=56, y1=96, x2=107, y2=114
Type: 6
Info: 'MFS'
8:
Bounds: x1=7, y1=96, x2=53, y2=114
Type: 6
Info: 'HFS'
9:
Bounds: x1=113, y1=75, x2=135, y2=95
Type: -120
Info: 'KB'
10:
Bounds: x1=75, y1=121, x2=96, y2=138
Type: -128
Info: ''
DITL_900.txt
Items: (4 entries)
0:
Bounds: x1=107, y1=107, x2=165, y2=127
Type: 4
Info: 'OK'
1:
Bounds: x1=6, y1=1, x2=147, y2=38
Type: -120
Info: 'Total Disk Capacity:^0 KB'
2:
Bounds: x1=5, y1=38, x2=184, y2=56
Type: -120
Info: 'Please name your volume'
3:
Bounds: x1=8, y1=60, x2=174, y2=78
Type: 16
Info: 'Untitled'
DITL_850.txt
Items: (3 entries)
0:
Bounds: x1=103, y1=118, x2=158, y2=138
Type: 4
Info: 'NO'
1:
Bounds: x1=25, y1=118, x2=80, y2=138
Type: 4
Info: 'YES'
2:
Bounds: x1=6, y1=5, x2=178, y2=110
Type: -120
Info: 'Total Disk Capacity = ^0 KB. ^1^2^3'
DITL_800.txt
Items: (2 entries)
0:
Bounds: x1=103, y1=118, x2=158, y2=138
Type: 4
Info: 'OK'
1:
Bounds: x1=6, y1=5, x2=178, y2=110
Type: -120
Info: 'Total Disk Capacity = ^0 KB. ^1^2^3'
DITL_760.txt
Items: (3 entries)
0:
Bounds: x1=105, y1=118, x2=160, y2=138
Type: 4
Info: 'NO'
1:
Bounds: x1=28, y1=118, x2=83, y2=138
Type: 4
Info: 'YES'
2:
Bounds: x1=6, y1=5, x2=178, y2=110
Type: -120
Info: 'All the disk sectors were checked and verified. Total Disk Capacity = ^0 KB. ^1^2^3'
DITL_750.txt
Items: (2 entries)
0:
Bounds: x1=105, y1=118, x2=160, y2=138
Type: 4
Info: 'OK'
1:
Bounds: x1=1, y1=0, x2=180, y2=110
Type: -120
Info: 'All the disk sectors were checked and verified. Total Disk Capacity = ^0 KB. ^1^2^3'
DITL_700.txt
Items: (3 entries)
0:
Bounds: x1=4, y1=6, x2=120, y2=23
Type: -120
Info: 'Verifying Disk…'
1:
Bounds: x1=52, y1=51, x2=127, y2=126
Type: -128
Info: ''
2:
Bounds: x1=4, y1=22, x2=174, y2=37
Type: 8
Info: 'Press . to stop'
DITL_600.txt
Items: (1 entries)
0:
Bounds: x1=3, y1=5, x2=176, y2=125
Type: 8
Info: 'The drive at SCSI ID ^0 is being formatted. This process could take up to 4 hours, depending on the capacity of the drive.'